Processing...

`c = sqrt( "a" ^2+ "b" ^2)`

Enter a value for all fields

The **Diagonal of a Squared** calculator *Rectangle*computes the length of the diagonal of a rectangle.

**INSTRUCTIONS:** Choose your preferred length units and enter the following:

- (
**a**) Length of Side**a**of Rectangle - (
**b**) Length of Side**b**of Rectangle

**Diagonal Length (c):** The calculator returns the length of the diagonal (**c**) in feet. However, this can be automatically converted to other length units (e.g. centimeters) via the pull-down menu.

A rectangle is a four sided polygon (quadrilateral) with four squared corners (90^{o}). The diagonal is computed using the Pythagorean formula.

- Rolling Offsets (Run) – The Rolling Offset (Run) function computes the run length a rolling offset based on the offsets and fittings. (see diagram).
- Rolling Offsets (Travel) – The Rolling Offset (Travel) function computes the travel pipe length a rolling offset based on the offsets and fittings. (see diagram).
- Pipe Grading - The amount of drop needed over a run to maintain a specified grade
- Diagonal of a Square - This is a simple calculation to assist in computing the diagonal of a square.
- Diagonal of a Box - This computes the length of the diagonal of a box (
**T**) based on sides of length**R, S**and**U**. - Flow Rate - This computes flow rate based on the total volume and the time it took to accumulate.
- Pipe Flow Volume - This computes the total volume from a pipe based on the flow rated and the duration of flow.
- Volume of a Pipe
- Weight of Pipe Contents: Default is water. Also see Weight of sea water in pipe
- Volume of a Cylindrical Container (e.g. hot water tanks),
- Weight of Water in a Cylindrical Tank (e.g. hot water tanks),
- Volume of a Spherical Container,
- Weight of Water in a Spherical Container
- Volume of a Rectangular container
- Weight of Water in a Rectangular Container, and a
- Capillary Rise - The height of water in a small tube due to capillary force.
- Snow Water Equivalence - The volume of water created by an area and depth of snow.
- Pore Water Pressure - Pressure of uplift from the water table.
- Pressure Head - The Potential Gravity-Fed Water Pressure from a Tank (a.k.a. Pressure Head) equation calculates the water pressure that can be realized below a tank based on the height of storage.