Processing...

`Volume = V( d_1 , l_1 , d_2 , l_2 , d_3 , l_3 )`

Enter a value for all fields

The **Conic Cylinder Tank Volume** calculator computes the volume of a cylindrical tank with tapered (cone frustum) ends. Geometrically, this is a cylinder of any length (l) with a conic frustum on both ends. * Conic Cylinder* There are three radii and three lengths. See diagram.

**INSTRUCTION:** Choose units and enter the following:

- (
**d**) Diameter of Central Tank_{1} - (
**l**) Length of Central Tanks_{1} - (
**l**) Length of forward cone_{3} - (
**d**) End Diameter of forward cone_{3} - (
**l**) Length of rear cone_{2} - (
**d**) End Diameter of rear cone_{2}

**Volume of a Conic Cylinder Tanker (V):** The calculator returns the volume in gallons. However, this can be automatically converted to other volume units (e.g. liters) via the pull-down menu. Note: d_{2} and d_{3} are often the same., and so are l_{2} and l_{3}.

Geometrically, this is a central cylinder, with two frustums of a cones. The frustum of a cone is a section of a cone with two parallel planes defining the top and bottom of the section.

** CONTAINER SHAPES*** Conic Cylinder** Capsule Shaped** Box Container* * Spherical Tank*

For similar calculations with other shaped containers, click on the following:

- Volume of a Conic Cylinder
- Load Weight of a Conic Cylinder
- Volume of a Capsule (Spherocylinder)
- Load Weight of a Capsule (Spherocylinder)
- Total or Partial Volume of a Box (Rectangular). For the partial volume, simply use the depth of substance in the container instead of the total depth of the container.
- Total or Partial Load Weight of a Box (Rectangular). For the weight of a partial load, simply use the depth of substance in the container instead of the total depth of the container.
- Volume of a Spherical Container
- Total or Partial Load Weight of a Spherical Container. For the total load weight, simply indicated the same value for the measure depth (D) of the substance to equal twice the radius (R) of the container. (See diagram)
- The mean density of many substances, CLICK HERE.

The Mean Density of many substances (metals, mineral, chemicals, gases, woods, agricultural products, liquids and types of earths) can be looked up by CLICKING HERE.

Or you can see these formulas and other useful measurements all combined in one TRUCKING calculator.