Processing...

`V_2 = ( P_1 * V_1 )/ P_2 `

Enter a value for all fields

The **Boyle's Law for Final Volume** calculator computes the final volume (V_{2}) of a fixed amount of gas at a fixed temperature before it undergoes a change in state from an initial pressure (P_{1}) and volume (V_{1}) to a final pressure (P_{2}).

**INSTRUCTIONS**: Choose units and enter the following:

- (
**V**) Initial Volume_{1} - (
**P**) Initial Pressure_{1} - (
**P**) Final Pressure_{2}

**Final Volume (V _{2}):** The calculator return the volume in cubic meters. However this can be automatically converted to compatible units via the pull-down menu.

Boyle's Law is expressed in the following formula:

**V _{1} • P_{1} = V_{2} • P_{2}**.

where:

- V1 is the initial volume of the gas
- P1 is the initial pressure of the gas
- V2 is the final volume of the gas
- P2 is the final pressure of the gas

**Boyle’s Law** states that the volume of a gas varies inversely with its pressure if temperature is held constant. **Boyle's Law** (sometimes known as Mariotte's Law) describes the relationship a perfect gas where mass and temperature are kept constant. Under these conditions, the volume of the gas will vary inversely with the absolute pressure. This equation calculates a pressure given the corresponding elements of the equivalence; Initial pressure, Initial volume, and temperature.

**Boyle's Law **can be expressed as:

`PV = "constant"`

or

`p_1*V_1 = p_2*V_2`

where:

**P**= absolute pressure (Pa, psi...)**V**= volume (`m^3`, `ft^3`...)

**Boyles Law** has obvious visible effects on our everyday life, describing the phenomena associated with pressurized cans, balloons and similar mechanical devices that contain gases under pressure. One example is a weather balloon. As the balloon rises in the atmosphere, the pressure outside the balloon decreases, allowing the pressure inside the balloon to expand the balloon. As the balloon rises high enough the external pressure can drop enough that the balloon expands beyond its material's ability to stretch and the balloon will break. **Boyle's Law** basically defines that pressure and volume relationship both inside and outside the balloon.

Another example of **Boyle's Law** is the simple syringe. As you draw back the plunger on the syringe, you increase the volume in the chamber of the syringe causing a vacuum in the syringe which in turn sucks-in liquid on the other side of the needle .