Processing...

`p = "V" / "vR" `

Enter a value for all fields

The **Time to Pump **calculator computes the time required to pump a volume of liquid (**V**) based on the pump (volumetric flow) rate (**vR**).

**INSTRUCTIONS:** Choose units and enter the following:

- (
**V**) Volume of liquid (e.g. water) - (
**vR**) Pump Volume Rate (e.g. 26 gal/min)

**Time to Fill (p):** The calculator returns the pump time in minutes. However this can be automatically converted to many compatible units (e.g. seconds, hours, days) via the pull-down menu.

T = V/vR

where:

- T = Time to Pump
- V = Volume of liquid to be pumped
- vR = Pump Volumetric Flow rate

- 40 gal/min - Utilitech Plug-in Pool Cover Pump
- 30 gal/min - Utilitech 115-Volt Thermoplastic Submersible Utility Pump
- 42 gal/min - Zoeller 0.33 HP 115-Volt Cast Iron Submersible Sump Pump
- 158 gal/min - Generac 2" Clean Water Pump-HP 120-Volt Aluminum Gas-Powered Utility Pump

- Volume Pumped over time by Pump Flow-rate
- Time to Pump Volume by Flow-rate
- Duplex Pump Output: Barrels per stroke from a duplex pump.
- Triplex Pump Output: Barrels per stroke from a triplex pump.
- Quintuplex Pump Output: Barrels per stroke from a quintuplex pump.
- Barrel Production: Computes the total volume (barrels) produced over a period of time based on the production rate and duration.
- Annular Velocity: Compute the fluid flow velocity, based on the flow rate and pipe dimensions.
- Mud Buoyancy: Computes the buoyancy in mud
- Volume of a Pipe: Computes the volume of a pipe.
- Weight of Pipe Contents: Computes the weight (mass) based on density and pipe dimensions.
- Density of Oil:
- Crude at (48° API): 790.0 kg/m³
- Crude at (40° API): 825.0 kg/m³
- Crude at (35.6° API): 847.0 kg/m³
- Crude at (32.6° API): 862.0 kg/m³

- Energy in Crude Oil: 5800000.0 BTU/bbl
- Pump Efficiency