The Angles of Reflection and Refraction Calculator provides calculations for reflection and refraction. The equations are solved for the incident, reflected, and transmitted angles and the materials' indices of refraction at the interface between two materials. The light is coming in from material 1 (blue in the picture) on the left. Material 2 (red in the picture), where the light's going, is on the right. The angles are measured from the normal (see picture). The "normal" is a line perpendicular to the intersection of the two materials. In the picture, the horizontal line is the normal, and the vertical line is the interface between the two materials (between blue and white).
Snell's law (also known as Snell-Descartes law and the law of refraction) is a formula used to describe the relationship between the angles of incidence and transmission, when referring to light or other waves passing through a boundary between two different isotropic media, such as water, glass, or air.
In optics, the law is used in ray tracing to compute the angles of incidence or transmission, and in experimental optics to find the refractive index of a material. The law is also satisfied in metamaterials, which allow light to be bent "backward" at a negative angle of refraction with a negative refractive index.
Snell's law states that the ratio of the sines of the angles of incidence and refraction is equivalent to the ratio of phase velocities in the two media, or equivalent to the reciprocal of the ratio of the indices of refraction. The relationship can be seen in the following formula:
`(sin theta_t)/(sin theta_i) = v_2 / v_1 = n_1 / n_2`
The formula for Critical Angle between refraction and reflection is:is called the . The
`theta_c = sin^(-1) (n_2/n_1)`
The Law of Reflection is fairly straightforward: `theta_i = theta_r`. As you can see, the angle of reflection is entirely independent of the indices of refraction of the two materials. Both `theta_i` and `theta_r` are measured from the normal, but they're on opposite sides of the normal.
The Law of Refraction, commonly known as Snell's Law, is `n_1 sin(theta_i) = n_2 sin(theta_t)`. Both `theta_i` and `theta_t` are measured from the normal, but they're on opposite sides of the normal and interface.
If `n_2 < n_1`, there's an interesting phenomena termed Total Internal Reflection (TIR). As the name suggests, TIR is when all of the incident is reflected, so no light transmits into the second material. To see why, or at least when, this happens, let's look at Snell's Law rearranged to solve for `theta_t`.
Since `n_2 < n_1`, there an angle, called the Critical Angle, that is the largest incident angle that will still result in a transmitted wave. In other words, it's the largest possible value of `theta_i` such that `theta_t = sin^(-1) (n_1/n_2 sin(theta_i) ) ` evaluates to an answer. The critical angle is given by the formula:
It's worth mentioning that the critical angle is also where the angle of transmission is 90 degrees. This means that the transmitted wave won't travel into the second material so much as along the interface between the two materials. Any incident angle greater than the critical angle won't result in any transmission at all. To be clear, TIR and critical angles are only relevant when `n_2 < n_1`, i.e. when the wave travels from a material with a higher index of refraction to a material with a lower index of refraction.
You do not have permission to execute macro putFootnotes