Processing...

` = "Metal Siding for Gable End with Door"`

Enter a value for all fields

The **Metal Siding for Gable End with Door **calculator computes the metal siding materials for a wall under a gable roof end based on the dimensions.

**INSTRUCTIONS**: Choose units and enter the following:

- (
**H**) Height of Side Walls (not gable ridge) - (
**P**) Pitch - (
**S**) Span - (
**TO**) Truss Overhang (default 12"). - (
**DW**) Door Width - (
**DH**) Door Height - (
**DO**) Door Offset (Enter -1 for "centered").

- (
**PW**) Panel Width (default 36"). This is the coverage width and not necessarily the measured width of the metal panels.

**Metal Siding for Gable Ends (m):** The calculator returns:

**(TA) Area**: Total surface area of wall.**(nS) Number of Screws:**Total number of metal screws based on 75 screws per 100 ft^{2}.**(nP) Number of Panels:**This is the number of panels needed.**Panel Length:**For each panel going from left to right, the calculator returns the squared panel length needed.**(α) Cut Angle:**This is the angle for the panel cuts.

However, these can be automatically converted to compatible units via the pull-down menu.

The Metal Siding for Gable End with Door calculator computes the length of each pane going left to right. It uses the height of the side wall to start, and then follows the pitch up to the ridge. When the panel get to the door area, they are reduced by the door height IF they are 100% above the door.

Because it is better to have too much and to cut it, than not enough, an additional 3" are added to the panel lengths.

Functions for roofing and siding using metal panels and trim to compute the number of metal panels, trim and screws for various shaped roofs and walls based on the dimensions of the building.

**Metal for Gable Roof**: This estimates the materials needed for a simple gabled metal roof based on the roof dimensions.**Metal Siding for Gable End Wall:**This estimates the vertical metal siding panels for a wall under a gable end based on the dimensions.**Metal Siding for Gable End Wall with Door**: This estimates the metal siding materials for a wall under a gable end with a door based on the dimensions.**Metal Siding for Wall:**This estimates the metal siding materials for a rectangular wall based on the dimensions.**Metal for Dormer Roof**: This estimates the metal panel and trim materials for one or more roof dormers based on dimensions.**Metal for Gambrel Roof**: This estimate the length and number of metal panels needed for a gambrel roof based on dimensions.**Metal Panels for Gambrel Wall**: This computes the number of vertical siding panels, their lengths and the total length of vertical panels on a wall under a gambrel roof. It also includes the total square feet and the number of metal screws needed at 0.75 screws per square foot.**Metal for Hip Roof**: This estimates the metal roof materials for a hip roof based on dimensions.**Metal for a Pyramid Roof**: This estimates the metal roof materials for a pyramid hip roof based on dimensions**Metal for a Shed Roof**: This estimates the total number of metal panels and lengths of trim needed to cover a single sloped roof based on dimensions..**Metal for Shed (Roof and Walls)**: This estimates the total number and length of metal panels for the roof and walls based on the ridge length of the roof, the front and back heights, the width of the shed roof building and the front and back overhangs. See simple ag run-in below.**Pole Barn Materials**: This uses an estimated the linear feet of metal panels needed for a pole barn with a door way, and provides an estimated cost for the metal panels for the roof and siding based on a the dimension and cost per linear foot of panels.**Pole Barn Metal Roof and Siding Cost**: This uses an estimated the linear feet of metal panels needed for a pole barn with a door way, and provides an estimated cost for the metal panels for the roof and siding based on a the dimension and cost per linear foot of panels.**Screws for Metal Gable Roof:**This estimates the number of metal panel screws needed for a gable roof based on roof dimensions.>**Screws for Metal Siding on a Gable End:**This computes the number of metal panel screws needed for metal siding for a wall under a gable roof end based on the dimensions.**Screws for Metal Siding on a Gable End with Door:**This computes the number of metal panel screws needed for metal siding on a wall under a gable roof with a doorway based on the dimensions.**Screws for Gambrel Metal Roof**: This computes the number of screws to attach metal panels needed for a gambrel roof based on the dimensions.**Screws for Metal Siding Wall:**This computes the number of metal panel screws for metal siding on a rectangular wall based on the dimensions.**Corrugated Metal Paint or Coating Volume**: This estimates the volume of paint or other coating (e.g., spray insulation) is needed for a corrugated surface.

Materials for roofs, walls and dormers include panels (number and length), panel cut angle, the number of required metal panel screws, lengths of ridge cap, gable trim, angle trim, snow guard, purlins (number and length), surface area and ridge and valley lengths where appropriate.

There are several price points for metal roofing and siding, but the common Agriculture Panel (Ag Panel) is widely used and often the most economical. Ag Panel metal has reached the point where it is less expensive as a roofing material than common asphalt shingle. For this reason, Ag Panel pricing is provided from a survey for convenience.

The C-Lok, Ag Panel, G-Rib price survey includes the following for the most recent pricing surveyed:

- Date Survey: 3/7/24
- Source of Pricing Source: CN Metals
- Cost per Unit:
- [$3.19 USD/ft] - Panel (36" wide) - dollars per linear foot
- [$0.09 USD/screw] - Screws (with seal gasket) - dollars per screw
- [$1.74 USD/ft] - Ridge Cap - dollars per linear foot
- [$1.84 USD/ft] - Outside Corner (trim) - dollars per linear foot
- [$1.25 USD/ft] - Snow Rail - dollars per linear foot
- [$2.85 USD/ft] - Drip Edge - dollars per linear foot
- [$0.2 USD/ft²] - Fanfold Insulation - dollars per square foot

**NOTICE**: Before risking health or wealth on calculator results, **confirm calculator estimates with a professional sources** and **ALWAYS ADHERE to LOCAL BUILDING CODES**.

The Pole Barn Calculator contains functions to compute the construction materials for a pole barn with concrete piers, a slab, wood framing, roof trusses for a normal gabled roof and metal panels and trim for the roof and siding.

**Gable Roof Metal**: This estimates the materials needed for a metal roof for a simple gabled roof based on the roof dimensions.**Purlins for a Roof**: This computes the total number and length of purlins for a simple gable roof based on the ridge length of the roof, the roof pitch and the span of the roof.**Trusses Needed for Roof**: This computes the number of trusses needed for a roof based on the ridge length and spacing.**Metal Siding for Gable Ends**: This computes the metal siding materials (vertical panels) for a wall under a gable roof end based on the dimensions.**Metal Siding for Gable End with Door**: This computes the metal siding materials for a wall under a gable roof end based on the dimensions.**Girts for a Building**: This computes the number of rows of girts and their lengths for a building.**Wall Beams for a Building**: This computes the lengths beams for the outer wall of a building.**Posts for a Building:**This computes the number of vertical posts for a building based on dimensions and spacing.**Rebar and Concrete in a Slab**: This computes the total length and weight of rebar and the volume of concrete needed for a slab.**Piers for a Building**: This computes the number of piers for a building and the amount of concrete needed.**Pole Barn Materials**: This computes the top to bottom framing and roofing materials needed for a pole barn (see picture) based on a few dimension.**Pole Barn Metal Roof and Siding Cost**: This uses an estimated the linear feet of metal panels needed for a pole barn with a door way, and provides an estimated cost for the metal panels for the roof and siding based on a the dimension and cost per linear foot of panels.**Corrugated Metal Paint or Coating Volume**: This estimates the volume of paint or other coating (e.g., spray insulation) is needed for a corrugated surface.

**IMPORTANT NOTE**: **Confirm all calculations with authoritative sources** such as architectural drawings before risking health or wealth on the results of any calculator, and **ALWAYS adhere to government approved building codes**.