Processing...

The **Metal Siding Calculator** contains functions and data for computing the amounts and lengths of panels for metal (__ vertical__) siding. This is common in agriculture buildings and pole barns.

**Metal Siding for Gable Ends**: Computes the metal siding materials for a wall under a gable roof based on the dimensions. This includes the total square feet (area), number of metal screws needed, the number and length of each panel, and the cut angle for the panels.**Metal Siding for Gable End with Door**: Computes the metal siding materials for a wall under a gable roof with a large door based on the dimensions. This includes the total square feet (area), number of metal screws needed, the number and length of each panel, and the cut angle for the panels.**Metal Siding for Wall**: Computes the number of vertical panels and other metal siding materials for a rectangular wall based on the dimensions.**Metal Siding Gambrel Wall**: Computes the number and length of metal vertical siding panels for a wall under a gambrel roof based on the span, total height, and height and width of the loft and width of the panels.**Metal for Shed (Roof and Walls)**: Computes the total number and length of metal panels for the roof and walls of a run-in shed based on the ridge length of the roof, the front and back heights, the width (span) of the building and the front and back overhangs.**Pole Barn Materials**: Computes the top to bottom framing, roofing and siding materials needed for a pole barn based on a few dimension.**Pole Barn Metal Roof and Siding Cost**: Estimates the linear feet of metal panels needed for a pole barn with a door way, and provides an estimated cost for the metal panels for the roof and siding based on a the dimension and cost per linear foot of panels.

These compute the number and length of panels, angles when appropriate and number of metal panel screws.

**Metal Panels for Roofing and Siding Pricing** provides the basic pricing survey for metal panel materials.

The Metal Panel Pricing Periodic Survey Data includes the following:

- Date Survey: 3/7/24
- Source of Pricing Source: CN Metals
- Source Web Site: https://www.cnmetalsllc.com/
- Source Phone Number: (301)334-9170
- Cost per Unit:
- [$3.16 USD/ft] - Economy Corrugated Panels (36" wide C-Lok or ag panels) dollars per liner foot
- [$4.48 USD/ft] - Premium Corrugated Panels (36" wide G-Rib) dollars per liner foot
- [$3.19 USD/ft] - Standing Seam Panel (15" wide) dollar per linear foot.
- [$3.19 USD/ft] - Panel (36" wide) - dollars per linear foot
- [$0.09 USD/screw] - Screws (with seal gasket) - dollars per screw
- [$1.74 USD/ft] - Ridge Cap - dollars per linear foot
- [$1.84 USD/ft] - Outside Corner (trim) - dollars per linear foot
- [$1.25 USD/ft] - Snow Rail - dollars per linear foot
- [$2.85 USD/ft] - Drip Edge - dollars per linear foot
- [$0.2 USD/ftÂ²] - Fanfold Insulation - dollars per square foot

The sources of this data include the following:

If you wish to have your data added to the list, contact vCalc via the "Contact Us" option to your right.

**CAUTION**: The pricing information provided is for calculating convenience with NO implied guarantees to the accuracy of the values listed. Authoritative sources should be sought to confirm any value **before risking health or wealth **on the veracity of the data. Furthermore, Calc gives no guarantee that you will be able to buy products at listed prices or even if they will be available. The data provided is purely a convenience for making estimates, so we repeat, ALWAYS use local pricing and authoritative specifications.

- Area of a Roof
- Pitch of a Roof
- Number of Trusses Needed for a Roof
- 4x8s needed for a roof
- Shingles needed for a roof
- Number and Length of Metal Roof Panels
- Number and Length of Purlins
- Number and Length of Rafters
- Number and Length of Rafter and Collar ties

- Number and Length of wall top and bottom wall plates
- Number of Studs for a Room
- Number of Studs in a Wall
- Room Interior Area (wall and ceiling)
- Cubic Feet in a Room (volume)
- Number of 4x8 or 4x12 Sheets for a Room