Processing...

`r = ( "c" )^2 / (8* "h" ) + "h" /2`

Enter a value for all fields

The **Radius of an Arch** calculator computes the radius (r) of a circle that would trace an arc of a certain chord length (c) and at a certain height (h).

**INSTRUCTIONS:** Choose units and enter the following:

- (c) Length of the Chord (see diagram)
- (h) Height of the Arc from the chord to the highest point.

**Radius of Arch (r):** The calculator returns the radius is in inches. However, this can be automatically converted to numerous other length units (e.g. centimeters or yards) via the pull-down menu.

The Radius of an Arch calculator computes the radius of a circle that can be used to mark an arch based on the cord length of the arch and the height of the arch. Arches on buildings and arched railings can be built using this formula. The following is a video (YouTube) that shows the use of this equation to build an arched railing on a porch. CLICK HERE. This can also be used to trace lines for painted arches as in the photograph of arches painted on a barn door (Special thanks to my friend Austin).

The formula for the Radius of an Arch is:

`r = c^2 / (8*h) + h/2`

where:

- r = radius of arch
- c = arch chord length
- h = height of arch

* Arches Painted on Barn Door*

Let's use my neighbor's sliding barn doors as our working example. But you'll see that it works for any application.

- First, measure how wide you want your arch. This is the Length of the Chord (c) in the diagram, but it's the width of the white sections in the barn door way.
- Then, choose the drop you want from the apex. This is (h) in the diagram. On the doorway, it looks like the drop is about a foot.
- With these measurements, you can use this calculator to compute the radius (r) of the circle that will be your guide.
- Next, cut a piece of string or mark the string on a plumb-bob to the length of the radius (r).
- Then, calculate and measure where the mid-point from the ends of your arch.
- Then go to the apex of where you want the arch, at the highest point in the middle and lower your string straight down. This is where the plumb-bob works well. The bottom of the string will mark your center point of the circle; mark it.
- Then attach the end of your string to that center point with a tack or screw.
- Then extend the string and let it work as a compass for you to draw your arc from side to side.

Viola! You're done. You now have a perfectly rounded arch drawn on your material, and you can paint or cut with precision.

**Circle Area**- This computes the area of a circle given the radius**(A = π r**.^{2})**Segment Area f(r,θ)**- This computes the area of an arc segment of a circle given the radius (**r**) and angle (**θ**)**Segment Area f(r,h)**- This computes the area of an arc segment of a circle given radius (**r**) and the depth (**h**) into the circle.**Sector Area f(r,Θ)**- This computes the area of a sector (pie slice) of a circle given the radius (**r**) and angle (**Θ**).**Area of Annulus**- This computes the area of an annulus (ring) given the inner radius (**r**) and outer radius (**R**).**Radius -Center to a Point**- This computes the radius of a circle given the center point (**h,k**) and any other point (**x,y**) on the circle.**Circumference**- This computes the circumference of a circle given the radius (**C = 2 π r**).**Arc Lengths**- This computes the length of a cord segment (arc length) on a circle given the radius (r) and angle (**Θ**)**Circle within a Triangle**- This computes the radius of a circle inscribed within a triangle given the length of the three sides (**a,b,c**) of the triangle.**Circle around a Triangle**- This computes the radius of a circle that circumscribes a triangle given the length of the three sides (**a,b,c**) of the triangle.**Radius from Circumference**- This computes the radius of a circle given the circumference.**Circumference from Area**- This computes the circumference of a circle given the area.**Radius from Area**- This computes the radius of a circle given the area.**Radius from Chord**- This computes the radius of a circle based on the length of a cord and the cord's center height.